SOC 17-2112 · BLS relative AI exposure

Industrial engineers

Also called Engineer · Process Engineer · Project Engineer · Ergonomist

Very high

  1. Low
  2. Moderate
  3. High
  4. Very high

AI exposure, relative to other occupations, as BLS rates it. 206 occupations share this category, with 53.2 million workers.

Workers, 2025
365,100
BLS projection to 2035
+12.4% projected
Median wage, 2025
$102,440
Typical education
Bachelor's degree

Exposure does not imply job loss, productivity gains, automation probability, or wage effects.

Embed

Each frame credits U.S. Bureau of Labor Statistics and O*NET 30.1 and links back to its page. Preview it.

Cite
CSV Post on X

The 91 tasks O*NET lists · 8 seen in every usage sample · 47 never

In every sample 8 In half or more 6 In under half the samples 30 Never seen 47

Each square is one task, brighter where more samples of AI-assistant conversations named it. Details below.

The job market

BLS projection · Indeed postings

BLS projection, 2025 to 2035

+12.4% projected

  1. This job +12.4%
  2. Very high exposure +2.0%
  3. All 831 jobs +3.5%

From 365,100 to 410,600. An exposure category is not a forecast of employment growth or decline.

BLS names no AI factor for this job.

Indeed postings, Industrial Engineering

+23% since February 2020

As a table
MonthIndustrial EngineeringMedian sector
Feb 2020 100.6 100.0
Feb 2021 102.4 104.2
Feb 2022 188.9 172.0
Feb 2023 140.7 146.2
Feb 2024 109.8 119.9
Feb 2025 88.4 108.8
Feb 2026 97.5 106.6
2 October 2026 123.1 106.2

The last day of each month, seasonally adjusted, seven-day average, February 2020 to 2 October 2026. Postings in most sectors peaked in 2022 and have fallen since; the chart does not separate causes.

Tasks seen in AI-assistant conversations

O*NET 30.1 · Anthropic Economic Index

19%

of the job's O*NET tasks appeared in the median of 7 samples of AI-assistant conversations, December 2024 to May 2026 · 7 points above the median job (11%)

11–33% across 7 samples, December 2024 to May 2026. Each dot is one sample; the tall mark is the median; the hairline is the median job, 11%.

A task seen in these conversations was not necessarily done by AI.

All 91 tasks, most often seen first
  1. Recommend methods for improving utilization of personnel, material, and utilities. 7 of 7
  2. Perform statistical analyses, such as social network pattern analysis, network modeling, discrete event simulation, agent-based modeling, statistical natural language processing, computational sociology, mathematical optimization, or systems dynamics. 7 of 7
  3. Prepare detailed reports or design statements, based on results of validation and qualification tests or reviews of procedures and protocols. 2 of 2
  4. Create, populate, or maintain databases for tracking validation activities, test results, or validated systems. 7 of 7
  5. Provide technical expertise or support related to manufacturing. 7 of 7
  6. Prepare reports summarizing information or trends related to manufacturing performance. 7 of 7
  7. Design tests of finished products or process capabilities to establish standards or validate process requirements. 2 of 2
  8. Analyze the financial impacts of sustainable manufacturing processes or sustainable product manufacturing. 2 of 2
  9. Analyze complex systems to determine potential for further development, production, interoperability, compatibility, or usefulness in a particular area, such as aviation. 5 of 7
  10. Investigate theoretical or conceptual issues, such as the human design considerations of lunar landers or habitats. 5 of 7
  11. Establish system operating or training requirements to ensure optimized human-machine interfaces. 4 of 7
  12. Design cognitive aids, such as procedural storyboards or decision support systems. 4 of 7
  13. Apply modeling or quantitative analysis to forecast events, such as human decisions or behaviors, the structure or processes of organizations, or the attitudes or actions of human groups. 4 of 7
  14. Determine root causes of failures or recommend changes in designs, tolerances, or processing methods, using statistical procedures. 1 of 2
  15. Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of finished product. 3 of 7
  16. Confer with clients, vendors, staff, and management personnel regarding purchases, product and production specifications, manufacturing capabilities, or project status. 3 of 7
  17. Communicate with management and user personnel to develop production and design standards. 3 of 7
  18. Communicate manufacturing capabilities, production schedules, or other information to facilitate production processes. 3 of 7
  19. Plan and establish sequence of operations to fabricate and assemble parts or products and to promote efficient utilization. 2 of 7
  20. Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency using drafting tools and computer. 2 of 7
  21. Complete production reports, purchase orders, and material, tool, and equipment lists. 2 of 7
  22. Formulate sampling procedures and designs and develop forms and instructions for recording, evaluating, and reporting quality and reliability data. 2 of 7
  23. Recommend workplace changes to improve health and safety, using knowledge of potentially harmful factors, such as heavy loads or repetitive motions. 2 of 7
  24. Assess the user-interface or usability characteristics of products. 2 of 7
  25. Write, review, or comment on documents, such as proposals, test plans, or procedures. 2 of 7
  26. Develop or implement human performance research, investigation, or analysis protocols. 2 of 7
  27. Develop or implement research methodologies or statistical analysis plans to test and evaluate developmental prototypes used in new products or processes, such as cockpit designs, user workstations, or computerized human models. 2 of 7
  28. Analyze validation test data to determine whether systems or processes have met validation criteria or to identify root causes of production problems. 2 of 7
  29. Communicate with regulatory agencies regarding compliance documentation or validation results. 2 of 7
  30. Prepare, maintain, or review validation and compliance documentation, such as engineering change notices, schematics, or protocols. 2 of 7
  31. Design validation study features, such as sampling, testing, or analytical methodologies. 2 of 7
  32. Investigate or resolve operational problems, such as material use variances or bottlenecks. 2 of 7
  33. Review product designs for manufacturability or completeness. 2 of 7
  34. Prepare documentation for new manufacturing processes or engineering procedures. 2 of 7
  35. Design, install, or troubleshoot manufacturing equipment. 2 of 7
  36. Evaluate manufactured products according to specifications and quality standards. 2 of 7
  37. Estimate costs, production times, or staffing requirements for new designs. 2 of 7
  38. Estimate production costs, cost saving methods, and the effects of product design changes on expenditures for management review, action, and control. 1 of 7
  39. Review production schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities. 1 of 7
  40. Coordinate and implement quality control objectives, activities, or procedures to resolve production problems, maximize product reliability, or minimize costs. 1 of 7
  41. Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards. 1 of 7
  42. Study operations sequence, material flow, functional statements, organization charts, and project information to determine worker functions and responsibilities. 1 of 7
  43. Develop validation master plans, process flow diagrams, test cases, or standard operating procedures. 1 of 7
  44. Troubleshoot new or existing product problems involving designs, materials, or processes. 1 of 7
  45. Evaluate precision and accuracy of production and testing equipment and engineering drawings to formulate corrective action plan. 0 of 7
  46. Record or oversee recording of information to ensure currency of engineering drawings and documentation of production problems. 0 of 7
  47. Direct workers engaged in product measurement, inspection, and testing activities to ensure quality control and reliability. 0 of 7
  48. Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization. 0 of 7
  49. Implement methods and procedures for disposition of discrepant material and defective or damaged parts, and assess cost and responsibility. 0 of 7
  50. Regulate and alter workflow schedules according to established manufacturing sequences and lead times to expedite production operations. 0 of 7
  51. Schedule deliveries based on production forecasts, material substitutions, storage and handling facilities, and maintenance requirements. 0 of 7
  52. Collect data through direct observation of work activities or witnessing the conduct of tests. 0 of 7
  53. Conduct interviews or surveys of users or customers to collect information on topics, such as requirements, needs, fatigue, ergonomics, or interfaces. 0 of 2
  54. Advocate for end users in collaboration with other professionals, including engineers, designers, managers, or customers. 0 of 2
  55. Inspect work sites to identify physical hazards. 0 of 7
  56. Prepare reports or presentations summarizing results or conclusions of human factors engineering or ergonomics activities, such as testing, investigation, or validation. 0 of 7
  57. Perform functional, task, or anthropometric analysis, using tools, such as checklists, surveys, videotaping, or force measurement. 0 of 2
  58. Provide technical support to clients through activities, such as rearranging workplace fixtures to reduce physical hazards or discomfort or modifying task sequences to reduce cycle time. 0 of 2
  59. Integrate human factors requirements into operational hardware. 0 of 7
  60. Review health, safety, accident, or worker compensation records to evaluate safety program effectiveness or to identify jobs with high incidence of injury. 0 of 2
  61. Design or evaluate human work systems, using human factors engineering and ergonomic principles to optimize usability, cost, quality, safety, or performance. 0 of 7
  62. Train users in task techniques or ergonomic principles. 0 of 7
  63. Conduct research to evaluate potential solutions related to changes in equipment design, procedures, manpower, personnel, or training. 0 of 7
  64. Provide human factors technical expertise on topics, such as advanced user-interface technology development or the role of human users in automated or autonomous sub-systems in advanced vehicle systems. 0 of 2
  65. Estimate time or resource requirements for ergonomic or human factors research or development projects. 0 of 7
  66. Operate testing equipment, such as heat stress meters, octave band analyzers, motion analysis equipment, inclinometers, light meters, thermoanemometers, sling psychrometers, or colorimetric detection tubes. 0 of 2
  67. Study product characteristics or customer requirements to determine validation objectives and standards. 0 of 2
  68. Maintain validation test equipment. 0 of 7
  69. Conduct validation or qualification tests of new or existing processes, equipment, or software in accordance with internal protocols or external standards. 0 of 7
  70. Recommend resolution of identified deviations from established product or process standards. 0 of 2
  71. Prepare validation or performance qualification protocols for new or modified manufacturing processes, systems, or equipment for production of pharmaceuticals, electronics, or other products. 0 of 2
  72. Resolve testing problems by modifying testing methods or revising test objectives and standards. 0 of 7
  73. Conduct audits of validation or performance qualification processes to ensure compliance with internal or regulatory requirements. 0 of 7
  74. Draw samples of raw materials, intermediate products, or finished products for validation testing. 0 of 2
  75. Direct validation activities, such as protocol creation or testing. 0 of 7
  76. Coordinate the implementation or scheduling of validation testing with affected departments and personnel. 0 of 7
  77. Participate in internal or external training programs to maintain knowledge of validation principles, industry trends, or novel technologies. 0 of 7
  78. Validate or characterize sustainable or environmentally friendly products, using electronic testing platforms. 0 of 7
  79. Assist in training equipment operators or other staff on validation protocols and standard operating procedures. 0 of 7
  80. Devise automated lab validation test stations or other test fixtures or equipment. 0 of 2
  81. Identify opportunities or implement changes to improve manufacturing processes or products or to reduce costs, using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts. 0 of 2
  82. Apply continuous improvement methods, such as lean manufacturing, to enhance manufacturing quality, reliability, or cost-effectiveness. 0 of 2
  83. Incorporate new manufacturing methods or processes to improve existing operations. 0 of 2
  84. Design layout of equipment or workspaces to achieve maximum efficiency. 0 of 7
  85. Supervise technicians, technologists, analysts, administrative staff, or other engineers. 0 of 7
  86. Train production personnel in new or existing methods. 0 of 7
  87. Develop sustainable manufacturing technologies to reduce greenhouse gas emissions, minimize raw material use, replace toxic materials with non-toxic materials, replace non-renewable materials with renewable materials, or reduce waste. 0 of 7
  88. Purchase equipment, materials, or parts. 0 of 7
  89. Evaluate current or proposed manufacturing processes or practices for environmental sustainability, considering factors such as greenhouse gas emissions, air pollution, water pollution, energy use, or waste creation. 0 of 2
  90. Read current literature, talk with colleagues, participate in educational programs, attend meetings or workshops, or participate in professional organizations or conferences to keep abreast of developments in the manufacturing field. 0 of 2
  91. Redesign packaging for manufactured products to minimize raw material use or waste. 0 of 7
The 7 samples
SampleThis jobMedian job
Dec 2024–Jan 2025 27% 14%
Feb–Mar 2025 17% 14%
Aug 2025 11% 10%
Nov 2025 14% 13%
Feb 2026 19% 12%
Apr 2026 32% 8%
May 2026 33% 11%
The 110 other titles O*NET lists for this job, A to Z
  • Automation Engineer
  • Board Certified Ergonomist
  • Certified Professional Ergonomist
  • Cloud Site Reliability Engineer
  • Cognitive Engineer
  • Continuous Improvement Engineer
  • Corporate Quality Engineer
  • Design Engineer
  • District Plant Engineer
  • Documentation Engineer
  • Efficiency Analyst
  • Efficiency Engineer
  • Efficiency Expert
  • Electrical Reliability Engineer
  • Engineer
  • Engineering Inspector
  • Engineering Psychologist
  • Equipment Engineer
  • Equipment Validation Engineer
  • Equipment Validation Specialist
  • Ergonomic Consultant
  • Ergonomic Specialist
  • Ergonomics Consultant
  • Ergonomics Engineer
  • Ergonomics Specialist
  • Ergonomics Technical Advisor
  • Ergonomist
  • Facilities Engineer
  • Facility Engineer
  • Factory Engineer
  • Factory Expert
  • Factory Lay Out Engineer
  • Factory Lay-Out Engineer
  • Failure Analyst
  • Field Engineer
  • Foundry Process Engineer
  • Human Factors Advisor
  • Human Factors Engineer
  • Human Factors Engineers and Ergonomists
  • Human Factors Ergonomist
  • Human Factors Specialist
  • Human Machine Interface Engineer (HMI Engineer)
  • Industrial Engineer
  • Industrial Engineering Intern
  • Industrial Methods Consultant
  • Interface Designer
  • Lean Manufacturing Engineer
  • Liaison Engineer
  • Logistics Engineer
  • Manufacturing Applications Engineer
  • Manufacturing Automation Engineer
  • Manufacturing Controls Engineer
  • Manufacturing Electrical Engineer
  • Manufacturing Engineer
  • Manufacturing Engineers
  • Manufacturing Process Engineer
  • Manufacturing Project Engineer
  • Manufacturing Quality Engineer
  • Manufacturing Specialist
  • Manufacturing Systems Engineer
  • Methods Engineer
  • Metrologist
  • Occupational Ergonomist
  • Operations Engineer
  • Packaging Engineer
  • Plant Engineer
  • Process Development Engineer
  • Process Engineer
  • Process Improvement Engineer
  • Process Improvement Manager
  • Process Manufacturing Engineer
  • Product Manufacturing Engineer
  • Product Quality Engineer
  • Production Control Expert
  • Production Control Planner
  • Production Engineer
  • Production Engineering Tooling Coordinator
  • Production Expert
  • Production Tool Engineer
  • Project Engineer
  • Qualification Engineer
  • Quality Assurance Automation Engineer (QA Automation Engineer)
  • Quality Assurance Engineer
  • Quality Assurance Engineer (QA Engineer)
  • Quality Control Engineer
  • Quality Control Engineer (QC Engineer)
  • Quality Control Expert (QC Expert)
  • Quality Control Industrial Engineer (QC Industrial Engineer)
  • Quality Engineer
  • Quality Management Systems Engineer
  • Reliability Engineer
  • Research and Development Engineer (R and D Engineer)
  • Salvage Engineer
  • Service Reliability Engineer
  • Site Reliability Engineer
  • Standards Engineer
  • Supplier Quality Engineer
  • Supplier Quality Engineer (SQE)
  • System Validation Engineer
  • Systems Engineer
  • Systems Reliability Engineer
  • Test Inspection Engineer
  • Time Study Engineer
  • Usability Engineer
  • Usability Specialist
  • User Interface Designer (UI Designer)
  • Validation Engineer
  • Validation Engineers
  • Validation Specialist
  • Verification and Validation Engineer

Sources: U.S. Bureau of Labor Statistics, AI exposure categories and Employment Projections 2025–2035, public domain. Tasks and titles: This site incorporates information from the O*NET 30.1 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. The site has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications. Task usage: Anthropic Economic Index, CC BY. Postings: Indeed Hiring Lab, CC BY 4.0, to 2 October 2026. All sources are listed on the main page.