SOC 17-3029 · BLS relative AI exposure

Engineering technologists and technicians, except drafters, all other

Also called Non-Destructive Evaluation Technician · Non-Destructive Testing Specialist · Non-Destructive Testing Technical Specialist · Non-Destructive Testing Technician

High

  1. Low
  2. Moderate
  3. High
  4. Very high

AI exposure, relative to other occupations, as BLS rates it. 206 occupations share this category, with 42.1 million workers.

Workers, 2025
62,400
BLS projection to 2035
+2.8% projected
Median wage, 2025
$78,350
Typical education
Associate's degree

Exposure does not imply job loss, productivity gains, automation probability, or wage effects.

Embed

Each frame credits U.S. Bureau of Labor Statistics and O*NET 30.1 and links back to its page. Preview it.

Cite
CSV Post on X

The 40 tasks O*NET lists · 0 seen in every usage sample · 37 never

In every sample 0 In half or more 2 In under half the samples 1 Never seen 37

Each square is one task, brighter where more samples of AI-assistant conversations named it. Details below.

The job market

BLS projection · Indeed postings

BLS projection, 2025 to 2035

+2.8% projected

  1. This job +2.8%
  2. High exposure +3.1%
  3. All 831 jobs +3.5%

From 62,400 to 64,100. An exposure category is not a forecast of employment growth or decline.

BLS names no AI factor for this job.

Indeed postings, Industrial Engineering

+23% since February 2020

As a table
MonthIndustrial EngineeringMedian sector
Feb 2020 100.6 100.0
Feb 2021 102.4 104.2
Feb 2022 188.9 172.0
Feb 2023 140.7 146.2
Feb 2024 109.8 119.9
Feb 2025 88.4 108.8
Feb 2026 97.5 106.6
2 October 2026 123.1 106.2

The last day of each month, seasonally adjusted, seven-day average, February 2020 to 2 October 2026. Postings in most sectors peaked in 2022 and have fallen since; the chart does not separate causes.

Tasks seen in AI-assistant conversations

O*NET 30.1 · Anthropic Economic Index

7%

of the job's O*NET tasks appeared in the median of 7 samples of AI-assistant conversations, December 2024 to May 2026 · 4 points below the median job (11%)

0–10% across 7 samples, December 2024 to May 2026. Each dot is one sample; the tall mark is the median; the hairline is the median job, 11%.

A task seen in these conversations was not necessarily done by AI.

All 40 tasks, most often seen first
  1. Evaluate material properties, using radio astronomy, voltage and amperage measurement, or rheometric flow measurement. 5 of 7
  2. Assist scientists or engineers in the conduct of photonic experiments. 5 of 7
  3. Compute or record photonic test data. 3 of 7
  4. Interpret the results of all methods of non-destructive testing (NDT), such as acoustic emission, electromagnetic, leak, liquid penetrant, magnetic particle, neutron radiographic, radiographic, thermal or infrared, ultrasonic, vibration analysis, and visual testing. 0 of 2
  5. Interpret or evaluate test results in accordance with applicable codes, standards, specifications, or procedures. 0 of 7
  6. Identify defects in solid materials, using ultrasonic testing techniques. 0 of 2
  7. Make radiographic images to detect flaws in objects while leaving objects intact. 0 of 7
  8. Prepare reports on non-destructive testing results. 0 of 2
  9. Select, calibrate, or operate equipment used in the non-destructive testing of products or materials. 0 of 2
  10. Visually examine materials, structures, or components for signs of corrosion, metal fatigue, cracks, or other flaws, using tools and equipment such as endoscopes, closed-circuit television systems, and fiber optics. 0 of 2
  11. Examine structures or vehicles such as aircraft, trains, nuclear reactors, bridges, dams, and pipelines, using non-destructive testing techniques. 0 of 2
  12. Document non-destructive testing methods, processes, or results. 0 of 2
  13. Produce images of objects on film, using radiographic techniques. 0 of 2
  14. Supervise or direct the work of non-destructive testing trainees or staff. 0 of 2
  15. Conduct liquid penetrant tests to locate surface cracks by coating objects with fluorescent dyes, cleaning excess penetrant, and applying developer. 0 of 7
  16. Map the presence of imperfections within objects, using sonic measurements. 0 of 2
  17. Develop or use new non-destructive testing methods, such as acoustic emission testing, leak testing, and thermal or infrared testing. 0 of 2
  18. Identify defects in concrete or other building materials, using thermal or infrared testing. 0 of 7
  19. Maintain clean working environments, according to clean room standards. 0 of 7
  20. Adjust or maintain equipment, such as lasers, laser systems, microscopes, oscilloscopes, pulse generators, power meters, beam analyzers, or energy measurement devices. 0 of 7
  21. Document procedures, such as calibration of optical or fiber optic equipment. 0 of 7
  22. Set up or operate assembly or processing equipment, such as lasers, cameras, die bonders, wire bonders, dispensers, reflow ovens, soldering irons, die shears, wire pull testers, temperature or humidity chambers, or optical spectrum analyzers. 0 of 7
  23. Test or perform failure analysis for optomechanical or optoelectrical products, according to test plans. 0 of 7
  24. Assist engineers in the development of new products, fixtures, tools, or processes. 0 of 7
  25. Recommend optical or optic equipment design or material changes to reduce costs or processing times. 0 of 7
  26. Set up or operate prototype or test apparatus, such as control consoles, collimators, recording equipment, or cables. 0 of 7
  27. Monitor inventory levels and order supplies as necessary. 0 of 7
  28. Assemble fiber optical, optoelectronic, or free-space optics components, subcomponents, assemblies, or subassemblies. 0 of 7
  29. Optimize photonic process parameters by making prototype or production devices. 0 of 7
  30. Splice fibers, using fusion splicing or other techniques. 0 of 7
  31. Build prototype optomechanical devices for use in equipment such as aerial cameras, gun sights, or telescopes. 0 of 7
  32. Terminate, cure, polish, or test fiber cables with mechanical connectors. 0 of 7
  33. Perform diagnostic analyses of processing steps, using analytical or metrological tools, such as microscopy, profilometry, or ellipsometry devices. 0 of 7
  34. Assemble or adjust parts or related electrical units of prototypes to prepare for testing. 0 of 7
  35. Repair or calibrate products, such as surgical lasers. 0 of 7
  36. Design, build, or modify fixtures used to assemble parts. 0 of 7
  37. Assemble components of energy-efficient optical communications systems involving photonic switches, optical backplanes, or optoelectronic interfaces. 0 of 7
  38. Lay out cutting lines for machining, using drafting tools. 0 of 7
  39. Mix, pour, or use processing chemicals or gases according to safety standards or established operating procedures. 0 of 7
  40. Fabricate devices, such as optoelectronic or semiconductor devices. 0 of 7
The 7 samples
SampleThis jobMedian job
Dec 2024–Jan 2025 7% 14%
Feb–Mar 2025 10% 14%
Aug 2025 10% 10%
Nov 2025 10% 13%
Feb 2026 7% 12%
Apr 2026 0% 8%
May 2026 0% 11%
The 136 other titles O*NET lists for this job, A to Z
  • Agricultural Engineering Technician
  • Agricultural Engineering Technicians
  • Agricultural Engineering Technologist
  • Air Analyst
  • Air Tester
  • Biomedical Engineering Aide
  • Biomedical Engineering Technician
  • Biomedical Engineering Technologist
  • Blueprint Engineer
  • Certified Laser Technician (Certified Laser Tech)
  • Chemical Engineering Technician
  • Chemical Engineering Technologist
  • Corrosion Control Technician (Corrosion Control Tech)
  • Corrosion Technician (Corrosion Tech)
  • Drawing Checker
  • Drawing Tracer
  • Echometer Engineer
  • Electro-Optics Technician (Electro-Optics Tech)
  • Engineering Aide
  • Engineering Assistant
  • Engineering Technician
  • Fiber Optics Assembler
  • Fiber Optics Cabling Specialist
  • Fiber Optics Design Technician (Fiber Optics Design Tech)
  • Fiber Optics Instructor
  • Fiber Optics Specialist
  • Fiber Optics Technician (Fiber Optics Tech)
  • Film Color Tester
  • Fire Protection Engineering Technician
  • Form Designer
  • Foundry Technician
  • Gun Tester
  • Hardness Tester
  • Healthcare Laser Technician (Healthcare Laser Tech)
  • Heating Technician
  • Industrial Radiographer
  • Industrial X-Ray Operator
  • Job Captain
  • Laboratory Assistant
  • Laboratory Supervisor
  • Laboratory Technician
  • Laboratory Worker
  • Laser Assembly Technician (Laser Assembly Tech)
  • Laser Scanners Technician (Laser Scanners Tech)
  • Laser Specialist
  • Laser Technician (Laser Tech)
  • Marine Engineering Technician
  • Marine Engineering Technicians
  • Marine Engineering Technologist
  • Marine Surveyor
  • Material Stress Tester
  • Materials Engineering Technician
  • Materials Engineering Technologist
  • Medical Laser Technician (Medical Laser Tech)
  • Metal Tester
  • Metallurgical Engineering Technician
  • Metallurgical Engineering Technologist
  • Metallurgical Inspector
  • Metallurgical Laboratory Assistant
  • Metallurgical Technician
  • Metallurgical Tester
  • Metallurgist Helper
  • Mobile Laser Technician (Mobile Laser Tech)
  • Mobile Technician (Mobile Tech)
  • NDE Specialist (Non-Destructive Evaluation Specialist)
  • NDE Technician (Non-Destructive Evaluation Technician)
  • NDI Technician (Non-Destructive Inspection Technician)
  • NDT Coordinator (Non-Destructive Testing Coordinator)
  • NDT Engineer (Non-Destructive Testing Engineer)
  • NDT Inspector (Non-Destructing Testing Inspector)
  • NDT Inspector (Non-Destructive Testing Inspector)
  • NDT Scientist (Non-Destructive Testing Scientist)
  • NDT Specialist (Non-Destructive Testing Specialist)
  • NDT Technical Advisor (Non-Destructive Testing Technical Advisor)
  • NDT Technical Specialist (Non-Destructive Testing Technical Specialist)
  • NDT Technician (Non-Destructive Testing Technician)
  • Non-Destructive Technician (Non-Destructive Tech)
  • Non-Destructive Tester
  • Non-Destructive Testing Specialists
  • Nondestructive Tester
  • Nuclear Engineering Technician
  • Nuclear Engineering Technologist
  • Optical Engineering Technician
  • Optical Engineering Technician (Optical Engineering Tech)
  • Optical Engineering Technologist
  • Optical Fabrication Technician (Optical Fabrication Tech)
  • Optical Manufacturing Technician (Optical Manufacturing Tech)
  • Optics Manufacturing Technician (Optics Manufacturing Tech)
  • Optics Technician (Optics Tech)
  • Optics Test Technician (Optics Test Tech)
  • Optoelectronic Technician (Optoelectronic Tech)
  • Optomechanical Technician (Optomechanical Tech)
  • Ordnance Engineering Technician
  • Ordnance Engineering Technologist
  • Penetrant Inspector
  • Photonics Engineer
  • Photonics Engineering Technician (Photonics Engineering Tech)
  • Photonics Engineering Technologist
  • Photonics Laboratory Technician (Photonics Lab Tech)
  • Photonics Technician (Photonics Tech)
  • Photonics Technicians
  • Predictive Maintenance Specialist
  • Predictive Maintenance Technician (Predictive Maintenance Tech)
  • Radar Technician
  • Remotely Piloted Vehicle Controller (RPV Controller)
  • Removal Technician (Removal Tech)
  • Research Assistant
  • Ruling Technician (Ruling Tech)
  • Salvage Engineering Technician
  • Salvage Engineering Technologist
  • Sand Technician
  • Scanner
  • Scleroscope Tester
  • Sheet Tester
  • Sonar Technician
  • Spectrograph Operator
  • Spectrographer
  • Spectroscopist
  • Steel Analyst
  • Steel Tester
  • Strain Technician (Strain Tech)
  • Stress Analyst
  • Sulphate Tester
  • Surgical Laser Technician (Surgical Laser Tech)
  • Tape Duplicator
  • Tape Transferrer
  • Technician
  • Tensile Tester
  • Test Technician
  • Test Technician (Test Tech)
  • Tester
  • Thin Film Technician (Thin Film Tech)
  • Vibration Technician (Vibration Tech)
  • Welding Technician
  • X Ray Operator
  • X Ray Technician

Sources: U.S. Bureau of Labor Statistics, AI exposure categories and Employment Projections 2025–2035, public domain. Tasks and titles: This site incorporates information from the O*NET 30.1 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. The site has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications. Task usage: Anthropic Economic Index, CC BY. Postings: Indeed Hiring Lab, CC BY 4.0, to 2 October 2026. All sources are listed on the main page.